Fanuc Pmc Eprom Convert Tool [HOT]
Download File --->>> https://shoxet.com/2tB3Mn
How to Use the Fanuc PMC Eprom Convert Tool
The Fanuc PMC Eprom Convert Tool is a software program that allows you to convert the data stored in the Programmable Machine Control (PMC) system of your Fanuc CNC machine into a format that can be written to an Eprom chip. Eprom chips are a type of memory device that can store data even when the power is turned off. By using the Fanuc PMC Eprom Convert Tool, you can backup your PMC data, transfer it to another machine, or modify it using a PC.
The Fanuc PMC Eprom Convert Tool supports different types of Eprom chips and different series of Fanuc CNC machines. To use the tool, you need to connect your PC to the Fanuc CNC machine using a serial cable and follow these steps:
Select the type of Eprom chip you want to use. The tool supports 2764 and 27256 chips for Fanuc 0A series, and 27256 chips for Fanuc 0B/0C/0D/0E/0F series.
Select the start and stop address of the PMC data you want to convert. If you do not manually set these values, they will default to 0x000000 and 0xFFFFF respectively.
Click on the \"Read\" button to read the PMC data from the Fanuc CNC machine and display it on the screen.
Click on the \"Save\" button to save the PMC data as a binary file on your PC.
Click on the \"Convert\" button to convert the binary file into a format that can be written to an Eprom chip.
Click on the \"Write\" button to write the converted file to an Eprom chip using an Eprom programmer device.
The Fanuc PMC Eprom Convert Tool also supports other series of Fanuc CNC machines, such as Fanuc 3/6/9 series, Fanuc 15 series, Fanuc 16/18/20/21 series, and Fanuc 10/11/12 series. For more information about the tool and its features, please refer to [^1^].
The advantages of using the Fanuc PMC Eprom Convert Tool are that you can backup your PMC data in case of a system failure, transfer your PMC data to another machine with the same configuration, or modify your PMC data using a PC. For example, you can change the parameters, ladder logic, or custom macros of your PMC system using a PC editor and then write them back to the Eprom chip.
The disadvantages of using the Fanuc PMC Eprom Convert Tool are that you need to have a compatible Eprom chip and an Eprom programmer device, which may not be easily available or affordable. Also, you need to be careful when handling the Eprom chip, as it can be damaged by static electricity or exposure to light. Moreover, you need to make sure that the converted file matches the specifications of your Fanuc CNC machine, as writing an incorrect file may cause errors or malfunctions.
Therefore, before using the Fanuc PMC Eprom Convert Tool, you should always backup your original PMC data and test the converted file on a spare machine if possible. You should also consult the manuals and technical support of your Fanuc CNC machine and the Eprom programmer device for more details and instructions. 061ffe29dd