How to Install and Activate Autocom Version 23.2020 (Full + Kegen) + Firmware 1 & 2 Platine
Autocom is a multi-brand car and truck diagnostic software that has been developed since 1991. It supports a wide range of vehicles, systems and features, including electric and hybrid vehicles. The latest version of Autocom is 23.2020, which contains a lot of new database content and updates for both old and new vehicles.
In this article, we will show you how to install and activate Autocom Version 23.2020 (Full + Kegen) + Firmware 1 & 2 Platine on your computer. This is a fully functional version of Autocom that does not require any email activation. You will need a keygen that is provided in the package, as well as a patch that automatically changes the date to the time the activator is running and restores it after it is turned off.
Step 1: Download the package
The first step is to download the package that contains the Autocom software, the keygen, the firmware and the patch. You can find the link to download it in the reference section below[^1^]. The file size is about 1.9 GB and it does not require a password.
Step 2: Install the software
The next step is to install the Autocom software on your computer. You will need to have Windows 10 or Windows 8 (up to date), 4 GB RAM, 16 GB free space on the hard drive, screen resolution of 1440 x 900 or higher, connection to the internet, Bluetooth (SPP), USB port, Adobe Acrobat Reader 8.0 or higher, .NET framework 3.5 and 2.0 turned on and S-mode on Windows 10S turned off.
To install the software, follow these steps:
Extract the downloaded file to a folder on your computer.
Run the setup.exe file as administrator.
Follow the instructions on the screen and choose your preferred language.
Accept the license agreement and choose the installation folder.
Wait for the installation to complete.
Step 3: Update the firmware
The third step is to update the firmware of your Autocom CDP+ device. You will need to have a device with a serial number of 100251 or any other serial number that supports firmware version 1622. This is an older firmware that works on all clones, because many clones are 2 board/pcb and cannot use the latest firmware version 3200. However, older firmware does not work on newer cars (mostly 2015+ or BMW).
To update the firmware, follow these steps:
Connect your Autocom CDP+ device to your computer via USB cable.
Run the FirmwareUpdate.exe file as administrator from the folder where you installed the software.
Select your device type (car or truck) and click Next.
Select your device serial number and click Next.
Select firmware version 1622 and click Next.
Wait for the firmware update to complete.
Step 4: Activate the software
The final step is to activate the Autocom software using the keygen and the patch. The keygen does not require any email activation, but it requires changing the date to December 31st, 2019 before running it. The patch automates this process by changing the date to that time when you run it and restoring it after you close it.
To activate the software, follow these steps:
Run the Patch.exe file as administrator from the folder where you downloaded the package.
A window will pop up showing you that the date has been changed to December 31st, 2019.
Run the Keygen.exe file as administrator from the same folder.
Select your device type (car or truck) and enter your device serial number.